Rec and Sports

Renewable Energy From An Old Concept

When doing the research for a article on new green products, I was unaware of many of the different ways to convert the energy of the sun into electrical power. I have written about solar cell or photovoltaic cell systems, so let’s look at another type of solar energy system.

The Stirling engine goes back to the early 1800’s, when steam was the order of the day. Steam was used to power factories, trains, and many types of work that required lots of horsepower. However, with steam came the danger of a boiler blowing up when something went wrong. Robert Stirling saw a different approach. His invention still used fire to heat the hot chamber but instead of steam, he used the heat to move pistons.

The Stirling engine is a heat engine that is vastly different from the internal combustion engine. It is highly efficient, operates quietly and is great at converting otherwise wasted heat into kinetic energy. Its only drawback is loss of power from internal fraction. The gasses (most often air) used inside the engine remain inside and are never expelled. With no exhaust valves like a gasoline or diesel engine and with no explosions from combustion, the engines run very quietly.

The operation of the Stirling engine is not complex, it only requires an external heat source. Some heat sources have been fuel, while some solar designs use a Fernell lens, and the latest source is large parabolic mirrors.

Operation is simple: the gases are heated by an external source, causing the hot gas to move toward a cold chamber, in the process, a piston is driven and a flywheel rotated. To put it simply, movement is achieved from heat expansion. A few knock-offs of the Stirling engines are small enough to fit in your hand. Others system are designed to drive electrical generators. They are a about the size of a fifty-gallon drum.

The system is ideal when a concentrated heat source is applied, in this case sunlight. The sunlight is collected with parabolic mirrors and focused on to the surface of the hot chamber, causing the chamber to be heated and the engine to start. This temperatures can be very high. You know this from, when as a child, you took a magnifying glass and focused it on a piece of paper. When done correctly the paper would get dark and then a flame would appear.

The engine and support equipment is contained in a package small enough to be suspended from the end of a metal arm, much like the design of satellite TV systems but on a much larger scale. Some systems are producing 25K watts of power and have been installed and operational for a couple of years.

I will compare the different solar technologies in a later article. For now, I need to lay a foundational understanding of each of the green products used to produce power so a comparison can be made.

Michael